UPPER COMPLETIONS PRODUCTS
UPPER COMPLETIONS PRODUCTS
UPPER COMPLETIONS PRODUCTS
Wide selection of completion products and tubular accessories to support well completions/production; mitigate risks related to deployment, tubing movement, downhole control.
SLIDING SIDE DOOR
Provides a mean of communication in between the tubing and annulus. The applications vary between circulating inhibitors for corrosion control, well flow, commingle/selective/single production or injection between multiple production zones.
EXPANSION JOINT
The forces generated by thermal expansion or contraction can be significant. A device or completion component designed to enable relative movement between two fixed assemblies in the event of thermal expansion or contraction
LANDING NIPPLE
Run with completion tubing to provide a specific landing location for flow control equipment. It would aid in accommodating plugs, injection valves or memory gauges etc, depending upon the required application.
POLISHED BORE RECEPTACLE
The forces generated by thermal expansion or contraction along with ballooning/reverse ballooning can be significant leading to tubing failure. PBR enables to compensate or relieve from these tubing stresses in addition to act as a device for lighter fluid circulation for production if needed.
FLOW COUPLING
FLOW COUPLINGS are heavy wall connectors used in tubing strings and are designed to minimize the effect of internal erosive action caused by production fluids.
PUP JOINT
PUP JOINTs are used to adjust the height of full length tubing or casing strings. They are also used to adjust the depth of down hole tools.
PERFORATED PUP JOINT
PERFORATED PUP JOINTs are used to adjust the height of full length tubing or casing strings. They are also used to adjust the depth of down hole tools.
BLAST JOINT
BLAST JOINTs are used to adjust the height of full length tubing or casing strings. They are also used to adjust the depth of down hole tools.
PUMP OUT PLUG
Autofill tubing plugging device connected at the end of the tubing against which pressure is applied to set hydraulic set packers. Avoid the need to rig up wireline/slickline for plug setting and suitable for deviated/horizontal wells that acts as limit for running slickline for plug setting.
HYDRO TRIP SUB
Installed underneath a hydraulically actuated tool to enable required tubing pressures to activate the tool by a drop ball system. With ball seat shifting after fully shear it would only drop the ball which passes down the tubing through the full opening.
ADAPTER/CROSS-OVER
SledgeHammer ADAPTER/CROSS-OVER is a short tubular part with ‘Box-Pin’ thread configuration which is used to connect two tubular parts with same or different thread types and sizes.
SEAL UNIT & SEAL UNIT EXTENSION
The seals unit provide positive seal to higher pressures and temperatures. Many types of seals units are available, and others can be designed to fit specific needs.
SEAL BORE EXTENSION
SEAL BORE EXTENSION enables the longer sealing area or extracting of sealing area.
MILLOUT EXTENSION
MILLOUT EXTENSION is a tubular product which resemble pup joints/pup joint extensions and are not actually “milled” as its name implies.
BULL NOSE
The BULL NOSE is a blanking device used at the end of the string. Its primary function is to prevent flow from entering the bottom end of the string, whilst its rounded nose design provides a positives guide while running in hole. Bull noses come in standard tool joint thread configurations and can be modified on location to best fit the application for which they are being used.
SELF ALIGNING MULE SHOE
Allows the end of the guide to rotate and orient with the liner top without rotation of the tubing. Used in dual-wellbore or horizontal completions in which control of tubing rotation is difficult.
WIRELINE ENTRY GUIDE
The “WIRELINE ENTRY GUIDE” are used for safe re-entry of wireline tools from the casing into the tubing string. The internal bevel guides the wireline or slick line tool string back into the tubing.